Retractable Garden Water Hose Reel + 5/8" diameter Hose
FAQ
Installation Manual
Bracket Drilling Templates
Print on Letter or Legal size paper, without scaling:
Print on Legal size paper only, without scaling:
Retractable Garden Water Hose Reel + 5/8" diameter Hose
-
Includes a pre-installed, Automatic Rewinding, Reinforced 5/8" diameter braided PVC hose with high-quality, threaded brass end fittings
-
Retracting SmartPath Guide automatically levels the hose reel while rewinding to prevent uneven overlapping
-
180° Swivel Mount
-
Locks to Stop at any length - Simply pull until desired length and release.
-
Starter Nozzle, Mounting Hex Lag Bolts, and pre-installed hose included
How much of the hose length can I extend?
Upon receiving your hose reel, extend the hose slowly until you see the Yellow Warning Sticker. Please do not extend the hose past this point. If hose becomes stuck, wait 24 hours, then start pulling and releasing in small increments until hose retracts again.
Why isn't my hose fully retracting?
Wait 24 hours before retrying. Pull and Release in longer increments (3-4 feet) in order to trigger the spring mechanism again.
There's leaking at the hose connection!
An old or misaligned washer is the most likely culprit for leaks at the hose connection. Check for a black-colored hose washer at the connection.
Try our replacement hose washers!
- Make sure that the washer is seated securely before connecting to a hose.
- Remove all traces of plumber's tape/teflon tape.
Product Care
-
Make sure the Swivel Mount is installed securely before using.
-
Release water pressure by shutting off and draining the hose before rewinding.
-
Do Not disassemble.
-
Do not let go during rewinding, as it may cause the hose to whip.
-
Drain hose before prolonged inactivity to avoid stagnant water.
-
Shut off the lead valve when not in use
-
Avoid Freezing temperatures – empty hose reel at the end of the season.
-
Do not overtighten connector.
-
Read all directions and instructions before using this product.
-
Use only as directed.
-
Fits all standard U.S. hose thread connections (3/4”).
We want to hear from you!
Send us your question below, and we'll get back to you in a jiffy.
If applicable, please also include your Order Number in the Subject line.